-
Ground Spike for Swooper Banner
SKU: 4784-3
Ground spike for mounting swooper and feather flag banner poles into grass, dirt, or soil for a stable outdoor display. Push or tap the stake into the ground and slide your pole over the vertical sleeve, no tools required. Size: 30" long (20" buried...
$29.99 -
4pc Pole Set for Swooper Banner
SKU: 4784-5
4-piece pole set for swooper banners, the hardware your banner's sewn sleeve slides over for a complete outdoor display. At 14'-6" assembled, it gives your swooper banner the height and visibility needed for lot traffic. Banners sold separately...
$42.99 -
Bolt-On Roof Mount
SKU: 4784-95
Bolt-on roof mount designed to hold swooper banner poles on any solid surface, mount a flag on your dealership roof, building, or other fixed structure for high-visibility display. Fits Dealermarket's swooper banner line. 8" x 4" base 12" vertical...
$23.99 -
30" Replacement Fiberglass Ground Stake
SKU: UPFS
30" replacement fiberglass ground stake for outdoor flag pole displays. A direct replacement to keep your setup standing when an old stake wears out or breaks. Compatible with Dealermarket's 11' Unipole kits (Item# UP11). 30" fiberglass ground...
$5.99 -
Wall Mount For Swooper Banner
SKU: 4784-10
Flat wall mount for swooper banners, mounts to a building wall to hold the swooper pole set in a fixed position for a permanent or semi-permanent display at your dealership or storefront. Fastener hardware is not included. Size: 12" x 4" x 1-1/2" For a...
$21.99 -
Spinner Fly For Swooper Banner
SKU: 4784-6
Replacement spinner fly for swooper banner pole sets, a direct replacement for a worn or missing spinner fly on your existing setup. Sized to fit Dealermarket swooper banner pole sets. Size: 3/4" x 1-1/4" Sold individually (1 per pack) Need the full...
$7.99 -
Pole Mount For Swooper Banner
SKU: 4784-8
Pole mount for swooper banners, attaches the swooper pole set to an existing round pole or post for a fixed display without wall or ground installation. Fastener hardware is not included. Size: 9" x 2-1/4" x 2-1/4" For pole-mounted swooper banner...
$17.99 -
Angled Wall Mount For Swooper Banner
SKU: 4784-9
Angled wall mount for swooper banners, mounts to a building wall, and projects the swooper pole set outward at an angle for improved banner visibility away from the wall surface. Fastener hardware is not included. Size: 9" x 4-1/2" x 4" Angled...
$31.99 -
Angled Pole Mount For Swooper Banner
SKU: 4784-85
Angled pole mount for swooper banners, attaches to an existing pole or post and projects the swooper pole set outward at an angle for improved banner visibility away from the pole surface. Fastener hardware is not included. Size: 9" x 4" x 1-1/2" Angled...
$25.99 -
4pc Pole Set for Flat Top Swooper Banner
SKU: 4784-55
4-piece pole set designed specifically for REGULAR flat top swooper banners, not compatible with standard curved-top swooper banners. Requires the item #4784-3 ground spike (sold separately). Banners sold separately. Size: 12' x 2' 7" For use with...
$49.99 -
Tow Hitch Mount
SKU: 4784-4
Use this tow-hitch mount to display your swooper banners on your vehicle!Tow Hitch Mount for Swooper Banners21-1/4" x 12" x 2"Sold individuallyQuick ship 24-48 hours
$39.99 -
Water/Sand Base
SKU: 4784-2
Support your swooper banners or reusable balloon ground poles with this water/sand base.Water/Sand Base18" x 18" x 5-14"For use with Swooper Banners or Reusable Balloon ground polesSold individuallyQuick ship 24-48 hours
$34.99 -
Large Wheel Base
SKU: 4784-1SUV
Large swooper banner wheel base for SUVs and larger vehicles where the standard wheel base won't span the tire. Sits over the tire to anchor your swooper pole on the lot without drilling or permanent mounting. Pairs with a scratch guard (sold...
$34.99 -
Wheel Base for Swooper Banner
SKU: 4784-1
Standard swooper banner wheel base that anchors your swooper pole by sitting over a vehicle's tire — no drilling or permanent mounting required. The 8" vertical sleeve accepts the pole set, and the 16" legs span standard car and sedan tires. Pair...
$29.99 -
Scratch Guard for Swooper Banner
SKU: 4784-7
Protect your vehicles from scratches when running swooper banners on your lot. The 2' foam sleeve slides directly onto the swooper pole set, cushioning the pole where it contacts the vehicle. A simple, low-cost add-on for any wheel base setup. 2' foam...
$5.99 -
40lb. Water Base
SKU: ZWB
40lb. water base to anchor 11' Unipole flag poles on hard surfaces like pavement, parking lots, and other outdoor areas where driving a ground spike isn't an option. Fill with water or sand for up to 40 lbs. of stabilizing weight, then empty for easy...
$28.99 -
Stock Unipole Kit
SKU: UP11
11ft Stock Unipole Kit for outdoor flag displays at car lots, dealerships, and storefronts. The kit includes everything needed to set up the pole; flags are sold separately, so you can pair it with the Unipole-compatible flag of your choice. 11'...
$38.99 -
Spacewalker Hardware Kit
SKU: SW36
Spacewalker hardware kit for mounting flags on existing poles or building structures. Made from space-age metal, lightweight, non-corrosive, and rust-resistant. The kit comes complete and ready to install. Fits around any round pole from 3" to 10" in...
$86.99 -
Extra 1/2" x 32" Stainless Steel Straps for Interceptor Bracket
SKU: STR1
Replacement 1/2" x 32" stainless steel straps for Interceptor Brackets, a direct spare for when an existing strap wears out or needs replacement. Compatible with both single and double-sided Interceptor Bracket kits. Size: 1/2" x 32" stainless...
$4.99 -
Self-Locking Nylon Straps for Interceptor Bracket
SKU: SLS1
Replacement self-locking nylon mounting straps for Interceptor Brackets, extra straps for added support or to replace worn ones. Compatible with both single and double-sided Interceptor Bracket kits. Self-locking nylon mounting straps For use with...
$1.99 -
Double Sided Interceptor Bracket Kit for 3.5 x 7.5 Flags
SKU: I89
Double-sided Interceptor bracket kit for mounting 3.5' x 7.5' flags or banners on poles or buildings. Made from heavy-duty G005 T-5 aluminum alloy, no fiberglass or PVC. Double strapping is recommended in high wind areas. Kit includes: 1" square metal...
$69.99 -
Double Sided Interceptor Bracket Kit / 3x8 Flags
SKU: I76
Double-sided Interceptor bracket kit for mounting 3' x 8' flags or banners on poles or buildings. Made from heavy-duty G005 T-5 aluminum alloy, no fiberglass or PVC. Double strapping is recommended in high-wind areas. Kit includes: 1" square metal...
$64.99 -
Single Sided Interceptor Bracket Kit for 3.5 x 7.5 Flags
SKU: I42
Single-sided Interceptor bracket kit for mounting 3.5' x 7.5' flags or banners on poles or buildings. No fiberglass or PVC. Double strapping is recommended in high-wind areas. Kit includes: 1" square metal pole 2 stainless steel straps 1 plastic end...
$58.99 -
Single Sided Interceptor Bracket Kit / 3x8 Flags
SKU: I36
Single-sided Interceptor bracket kit for mounting 3' x 8' flags or banners on poles or buildings. No fiberglass or PVC. Double strapping is recommended in high-wind areas. Kit includes: 1" square metal pole 2 stainless steel straps 1 plastic end cap 1...
$56.99
